Window Cleaning Services Melbourne
Our commercial and office window cleaning service will have every window in your building sparkling.
We also ensure every windowsill and window frame is equally clean – including removing cobwebs and dust from window corners.
In fact, we’ll happily take on any glazed surface – inside and outside the building. That includes office window cleaning that also cover partitions, signage, mirrors, skylights and kitchen splashbacks.
We have all the safety equipment and accreditation to access windows at any height – including for high-rise offices. That includes full insurance and WorkCover for elevated work platforms (EWP).And because we’re committed to the security of your property and staff, all our staff must pass a thorough background check. We also undertake quality checks reports to ensure that our commercial and office window cleaning service remains at the highest standard.
We use Ionic Systems
HOW DOES WINDOW CLEANING SERVICE WORK?
Everyone has the right to work in safety, and that includes window cleaners. For decades, work at height was simply accepted as an occupational hazard of the window cleaning industry. Reach &
Wash® pure water system allows windows to be cleaned from the safety of the ground using long reaching, telescopic water fed poles. These water fed poles provide reach and control without the need for large scaffolding systems, unstable ladders or rope systems that all require additional setup and take down time. For this reason, work efficiency is improved. The time you spend on site is reduced. This all add up to cost savings for the company and customer. A soft bristled brush is used to scrub the dirt off the glass, while jets of pure water rinse the window. The pure water, as it has no impurities, dries to a spot-free finish leaving no marks behind. Using The Reach & Wash® system, modern window cleaning is no longer the dangerous job it once was.
EXTENDING YOUR CAPABILITIES
Safety is the most important benefit of the Reach & Wash® system, but it is not the only one. Window cleaners find that they are typically able to work at least twice as fast using telescopic water fed poles, but that’s not all… Reach & Wash® can clean to a height of 80ft, well beyond the reach of ladders, and is much safer, more efficient and cost-effective than other methods of working at height. For these reasons, it’s no surprise that window cleaners the world over are using Reach & Wash® pure water systems to clean higher, faster and most importantly, safer.
RECOGNISED SAFETY STANDARDS
Our systems conform to recognised industry standards such the European CE Mark. We’ve also invested heavily in making sure our systems are the safest available and are the ONLY manufacturer to be awarded FMVSS-208 certification for our systems.
We are committed to the environment, foreseeing a better, cleaner future for all. Our systems do not need to use harsh chemicals – rather they run off pure water, which provides you an eco-friendly cleaning solution which supply our full range of Ionic Systems water fed equipment and kits.
It’s all part of our global promise to deliver sustainable, industry-leading solutions to all. The Ionic Sytems products are known all over the world for their outstanding quality and performance. The Reach & Wash® brand has become synonymous with “Quality without Compromise”. It is also the industry standard for window cleaners all over the world. It’s no exaggeration to say that Reach & Wash® with its extending water fed pole system has revolutionised the industry. Enabling window cleaners to reach higher, work faster and stay safer. But that’s not all…
We don’t use any harsh chemicals, only pure water. Because of this it is the ideal solution for keeping solar arrays clean and operating at their peak. This provides the best method of cleaning in the safest most environmentally friendly way. With no harsh chemicals to carry on board, you can be sure you are safe.
Q. Will the windows be cleaned to a good standard?
A. When cleaned using the Reach & Wash® system windows will be cleaned better, and stay clean for longer. It’s worth remembering that as well as the glass the window frames will also be cleaned and the sills rinsed as part of the process.
Q. How does the cleaner know that the window is thoroughly cleaned when they can’t see the window close up?
A. Unlike window cleaning with hand tools when the outcome depends on skill and hand and eye co-ordination, Reach & Wash® is a process whereby the outcome is guaranteed provided the brush following purified water is passed over the window in a set pattern. With Reach & Wash® no skill is required, only the ability to be methodical and knowledgeable about the process.
Q. Compared to sectional poles what are benefits of telescopic Reach & Wash® waterfed pole system?
A. When extended telescopic water fed poles are progressively lighter toward the top and are therefore easier to use. Also, because the ground level may alter around buildings it is often necessary to adjust the pole length in small increments. Telescopic water fed poles are quickly and easily adjusted to the perfect length whereas the only way to adjust a sectional pole is to add or remove a section (2mtrs). Time is lost when sections are added or removed.
Q. How high do the waterfed poles reach?
A. The longest Reach & Wash® water fed pole reaches 25mtrs (80ft) from the ground. However, it is important for operators to become experienced in handling the shorter Reach & Wash® poles before using poles above 14mtrs (45ft).
Q. How does The Reach & Wash® system clean without detergent?
A. The simple explanation is that by providing a pure water cleaning system, you can clean without the need of detergent because when applied to the window ‘pure water strives to return to its natural impure state’.
Melbourne, Victoria, Australia 3000
1300 Mint Clean
1300 646 825
Mon - Sat